Beautiful and elegant, our basin taps are the perfect finishing touch to any bathroom! Picked your favourite? Now to install it…
Now, this sounds slightly more daunting but we promise it’s not as scary as it seems. Get that thinking cap on and you’ll be just fine.
What will I need?
– Grips
– Adjustable spanner
– Hexagonal bar key (comes with tap)
– Basin Wench
– Tap Spanner
Above, Welland Matt Black High Rise Basin Mixer Tap
Step by step instructions
1. First, check the new tap for imperfections.
2. Turn off hot and cold water via boiler or insolation valves.
3. Once the water is off, open the tap in mid position to drain excess water.
4. Undo tap connection but do not lose the washers.
5. Remove the hexagonal nut from the top.
6. Remove tap.
7. Clean area.
8. Check the new tap (Do this before removing the old one for warranty/returns purposes!)
9. Place tap in position.
10. Tighten the new hexagonal nut onto the threaded bar.
11. Reconnect hot and cold water.
12. Switch on water.
13. Open the tap to flush water through.
14. Check operation.
Above, Lea Matt Black High Rise Basin Mixer Tap
